IWLAN RCoax cables PE 1/2″,5GHz

一．Introduction:

二．Product Overview:

三．System composition:

四.Advantages:

High reliability: impact-resistant sheath, waterproof and dustproof, anti-vibration, impact and electromagnetic interference

Long transmission distance: 170 meters for a single leaky cable, 300 meters for two cables (5GHz)

Unique design: Increase the radial radiation range of the leaky cable to meet coverage requirements and ensure uniform signal coverage

Support dual Rcoax cable :2*2MIMO

Strong adaptability: This product can be installed on buildings without environmental restrictions

Easy to install: It can be directly installed with commonly used leaky cable installation tools (saw bow, file, 22mm wrench, joint making tool) and fixtures

 

五.Special Advantages:

The combination of WD-50-1/2″C Rcoax cable and WD-G40 has been successfully applied in many harsh industrial scenarios, meeting complex communication requirements and receiving unanimous praise from users. It has outstanding advantages in terms of installation and debugging as well as communication speed and reliability. The communication distance of a single leaky wave cable can reach up to 170 meters. The communication distance of two Rcoax cables using a dedicated power splitter can reach up to 300 meters. The communication delay is less than 1ms, realizing a reliable connection between a single AP one-to-one or one-to-many clients (non-roaming solves long-distance stable ultra-low latency communication).
 

六．Typical Applications:

Circular cross belts, high-rise warehouses, rail transit, elevated monorail conveyors, cranes, automatic guided vehicles, tunnels, elevators, etc.
 

七．Datasheets:

Rcoax cable WD-50-1/2″C
Product Structure	Cable Type	Radiation
	Nominal size	1/2"
	Inner conductor structure	Flexibility
	Insulation material	Physical foamed polyethylene
	Outer conductor material	Embossed copper foil longitudinal package
	Sheath material	Low smoke halogen-free flame retardant polyolefin
	Sheath outer diameter/color	15.6 mm / Yellow or customized color
Mechanical properties	Maximum tensile strength	1000 N
	Minimum bending radius (single bend)	80 mm
	Slot alignment instructions	Yes
	Recommended hanger spacing	＜1.5 m
	Installation temperature	-20~+60 ℃
	Operating temperature	-40~+80 ℃
	Storage temperature	-10~+50 ℃
ElectricalCharacteristics	Frequency band used (MHz)	5150-6000
	Polarization	Vertical polarization
	VSWR（Typical Value）	1.35
	Characteristic impedance	50±2 Ω
	Insulation dielectric strength	6000 V（DC，1 min）
	Minimum insulation resistance	10000 MΩ·km
	Sheath spark test voltage	8000 V（AC）

Electrical properties	Frequency band	Transmission loss	Coupling loss
	MHz	dB/100m,20℃	95%,50cm,dB
	5200	20.88	63.82
	5400	21.09	64.88
	5600	21.09	65.73
	5800	21.54	65.85

                                                                                  luctuation range: coupling loss ±5dB, transmission loss ±5%

 

Circular cross belts, high-rise warehouses, rail transit, elevated monorail conveyors, cranes, automatic guided vehicles, tunnels, elevators, etc.

 

八.Topology:

A.Use a single Rcoax cable

B.Use two Rcoax cables

九．Practical Application: